Are you looking for the 10 Guitar Speakers? If so, you’ve come to the right place.
Choosing the 10 Guitar Speakers can be difficult as there are so many considerations, such as Celestion, Eminence, Jensen Loudspeakers, Warehouse Guitar Speakers. We have done a lot of research to find the Top 20 10 Guitar Speakers available.
The average cost is $112.70. Sold comparable range in price from a low of $28.99 to a high of $329.00.
Based on the research we did, we think Celestion Ten 30 10" Guitar Speaker 8 Ohm is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling 10 Guitar Speakers (20 Sellers)
| Product Image | Product Name | Features | Check Price |
|---|---|---|---|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features:
- 95 db sensitivity helps provide an immersive sound experience
- Frequency response of up to 5000 hz lets you enjoy the midrange vocals
- The pressed steel design helps make the build sturdy
Features:
- Copper coil offers optimal power conduction for enhanced efficiency
- Crafted with kevlar loaded paper for increased audio distribution
- Chassis built with steel, it helps provide an enhanced structural strength
Features:
- Enjoy american music with this ragin cajun speaker
- The 75-watt output helps produce a loud sound
- This responsive speaker delivers improved tone and clarity
Features:
- M-roll surround for higher excursion and less cone breakage
- Double dipped cone apex for a really strong cone neck
- Bumped back plate for greater incursion before damage
Features:
- Frequency response of 95 hz – 5.5 khz helps provide an enhanced audio quality
- Engineered with a 1.75'' voice coil for minimum power compression
- The impedance of 8 ohms helps prevent sound distortion
Features:
- The 98.7 db sensitivity helps reduce the noise distortion for a clear sound quality
- Neodymium driver helps in less power consumption for efficient performance
- Change the damaged 10" speaker of your bass guitar with this replacement unit
$59.99
4.7
Features:
- Unit weight: 3 lbs.
- Impedance: 8 ohm.
- Seamed cone.
Features:
- Size: 10" chassis
- Rated power 60 watt rms
- Frequency range: 100 hz – 5.5 k hz
Features:
- Rich bass tone with good punch
- Tight low-end sound
- Recommended for sealed or vented enclosures
Features:
- Experience clear and refined audio with the frequency response of 90 – 5500 hz
- The sensitivity of 95 db helps deliver immersive sound with minimum distortion
- Up to 50 w of power helps boost the sound quality of this speaker
Features:
- Truncated frame allow for close driver to driver placement for multi-driver systems
- Cast aluminum frame will take the abuse of pro sound
- Powerful low frequency output in vented enclosures
Features:
- The steel material offers enhanced durability to this guitar speaker
- Play country rock and blues in high quality on this speaker with a frequency response of 100hz-6khz
- Equipped with a copper voice coil to provide efficient conductivity
Features:
- Chassis : staal.
- Diameter speaker : 10 ", 25 cm.
- Frequentierespons : 95 hz.
$28.99
Features:
- A full-blooded, authentic 10" 5core guitar speaker
- Rich and expressive, characterized by warm lows with a vocal mid-range and articulate top end
- Perfect upgrade for compact recording amps and practice amps
Features:
- Overall diameter 10".
- Impedance 8 ohm.
- Rated power: 40 watts.
$45.00
4.4
Features:
- Celestion tube 10 (8 ohms)
- Power rating: 30w
- Nominal impedance: 8ohms
$329.00
4.7
Reviewers Noted:
Search . Good sound quality . Lightweight . Compact . Good bass
Features:
- Experience enhanced and immersive sound quality with these loudspeakers
- Lightweight and compact design allows you to carry the speaker conveniently
- This pole-mountable speaker allows easy installation
$105.95
4.9
Reviewers Noted:
Good sound quality . Bass performance
Features:
- Guitarist description: warm and bold with shimmering highs. presented with overdrive distortion, it remains strong and articulate.
- Mids: aggressive.
- Highs: bright.
$134.99
4.9
Features:
- Suitable for jazz and rock'n'roll
- Frequency range: 100 hz – 5.5 khz
- Power: 35 w rms
$119.99
4.6
Features:
- Enjoy every beat of the music with this 50-watt guitar speaker
- Impedance of 8 ohm helps provide high-quality output
- Its 99.3 db sensitivity offers high-quality output for immersive sound
1. Celestion Ten 30 10" Guitar Speaker 8 Ohm
Product Details:
Specifications:
| Product Type | Guitar speaker |
| Diameter | 10” |
| Depth | 3.8” |
| Weight | 3.5 lb |
| Frequency Range | 85 Hz to 5000 Hz |
2. Celestion Pulse10 10" 200w Bass Speaker
Product Details:
With its robust steel-chassis, the celestion pulse10, provides a rock-solid bass performance whether alone in a single speaker combo, in a 4×10 or even an 8×10 cab. expect a tight, punchy low end with a warm mid-range that's full of presence, bringing focus and articulation to your playing. this heavy-duty driver truly delivers bass you can feel as well as hear.
Specifications:
| Product Type | Bass speaker |
| Chassis Material | Steel |
| Coil Material | Copper |
| Former Material | Polyimide |
| Nominal Diameter | 10" |
3. Eminence Patriot Ragin Cajun 10" Guitar Speaker, 75 Watts At 8 Ohms
Product Details:
The eminence ragin cajun 10" guitar speaker gives you classic american tone with a fat bottom end. the 75w ragin cajun has a solid tone with sparkling highs with a little bite to it that's perfect for american rock, blues, and country music. you'll love how responsive and articulate this speaker is. put a classic american-sounding speaker in your guitar amplifier, with the eminence ragin cajun 10" guitar speaker!
Specifications:
| Product Type | Speaker driver |
| Speaker Type | Passive |
| Continuous Power | 75 Watt |
| Frequency Response | 80 – 5000 Hz |
| Nominal Impedance | 8 Ohm |
| Sensitivity | 100.5 dB |
| Magnet Type | Ferrite |
| Speakers Included | 1 x speaker driver – 75 Watt – 80 – 5000 Hz – 8 Ohm – wired |
| Driver Details | Speaker driver: mid-bass driver – 10" – ferrite – polyamide |
| Diameter | 10.1 in |
| Weight | 6.39 lbs |
| Diameter | 9.6 in |
| Depth | 4.3 in |
4. Eminence Legend B810 10" Bass Guitar Speaker, 32 Ohm
Product Details:
Surround yourself with thumping bass with this eminence legends bass guitar speaker, featuring a copper voice coil for crystal clear reproduction. this speaker fits in 8 x 10-foot cabinets to deliver quality sound at 49 hz – 5.1 khz so you never miss the lows. a 150w power rating on this eminence legends bass guitar speaker ensures a quality experience.
Specifications:
| Product Type | Stage speaker driver |
| Speaker Type | Passive |
| Speaker Diameter | 10" |
| Continuous Power | 150 Watt |
| Peak Power | 200 Watt |
| Frequency Response | 49 – 5100 Hz |
| Nominal Impedance | 32 Ohm |
| Sensitivity | 92.7 dB |
| Diaphragm Type | Paper cone |
| Magnet Type | Ferrite |
| Driver Details | Speaker driver: woofer driver – 10" – ferrite – paper |
| Recommended Enclosures | Ported – 1.6 – 2.7 cubic feet Sealed – 0.5 – 1.24 cubic feet |
| Diameter | 10.1 in |
| Width | 10.1 in |
| Depth | 4.1 in |
| Weight | 6.7 lbs |
| Diameter | 9.1 in |
| Service & Support | Limited warranty – parts and labor – 7 years |
5. Celestion G10 Greenback 10" Guitar Speaker (8 Ohm)
Product Details:
The celestion g10 greenback is the 10 inch that thinks it's a 12 inch. this speaker was developed to recapture the legendary sound of celestion's 1970s 10s – a 10 inch speaker with a surprisingly meaty tone. low in output but with the weighty low-end balance of a 12 inch, the celestion g10 greenback features a complex, creamy mid-range and smooth, vintage top-end.
Specifications:
| Impedance | 8 Ohm |
| Frequency Response | 95 Hz – 5.5 kHz |
| Weight | 33 oz |
| Depth | 102 mm |
| Magnet Structure Diameter | 124 mm |
6. Eminence Legend Ca1059 10" Bass Guitar Speaker 8 Ohm
Product Details:
Eminence legend ca 1059 500w 10" bass speaker a larger magnet version of the popular legend ca10, the legend ca1059 is a 10" cast-frame bass guitar speaker with a proven track record as the speaker for punch and clarity in many famous oem cabinets throughout the decades. like the ca10, the ca1059's chassis is truncated on the sides for tight fitting in 2x, 4, and 8×10 configurations. along with higher xmax, the ca1059 also features a larger 59oz. ferrite magnet, producing higher efficiency, and lower qts for dampening than its smaller magnet version.
Specifications:
| Power | 500 Watts |
| Nominal Basket Diameter | 10" |
| Frequency Range | 50 Hz – 3.2 kHz |
| Sensitivity | 98.7 dB |
| Magnet | Ferrite |
7. Warehouse Guitar Speakers Veteran 10" 20w American Vintage Guitar Speaker 8 Ohm
Product Details:
This item was returned in mint condition. it is free of any performance issues, and has no scratches, blemishes, or other cosmetic flaws. the 10" veteran speaker from wgs has great crunchy cone breakup and clean, warm overtones. the seamed paper cone is key to this guitar speaker's sound.
Specifications:
| Basket Diameter | 10 1/16" |
| Magnet Diameter | 3 5/16" |
| Total Depth | 4 1/16" |
| Mounting Hole Centers | 9 11/16" |
| Mounting holes | 8 |
Reviews:
Just got the speaker today and normally I wait to write a review, but the improvement this speaker made in my 1976 SF Champ is simply awesome. First, it was super easy to install. Took me all of 15 minutes. The speaker holes lined up perfectly with the lugs coming out of the amp's baffle and the speaker's cable contacts were in exactly the same place as the original. Like it was made specifically for a Champ. The speaker looked very well made, with a nice cone, solid housing and the magnet on this speaker is huge compared to the stock speaker. My ratchet handle got stuck on it as I was installing it. Took some force to free it. Then came the test drive, with the amp volume set to 4. Wow. I used my 1987 Gibson LP Standard with Seymour Duncan SH-59's. I was immediately struck by the fullness across the tonal spectrum. Chimey treble with harshness removed, beautiful full midrange and tight and powerful bass without the flub and muddiness I had before. The guitar just rang and sang. Then I dimed the amp and the natural overdrive was impressive. So much better than the original speaker. No harsh high end anymore, great tight bass and a pleasant roar that makes you want to hit power chords all day. Solo notes were clear and distinct. Plus, the speaker cleaned up great when turning the guitar volume control down; sounding just like it did on lower amp volume levels. And I still have to break this puppy in and try it with my pedalboard!! This is the absolute best thing you can do for your SF Champ if it still has the stock speaker in it. Highly recommend this speaker!!blujonz
Looking for a 12 inch speaker to go with a custom-made skylark GA-5 amp head. Not having a ton of experience with different speakers I decided it was easier just to stick with one company to limit the overwhelming amount of choices. The G12c/s clean and tight low end smooth mid range and perfect top end that isn’t overly bright very articulate very efficient did add a little volume overall wonderful speaker. Thanks to British audio for The excellent customer service and the detailed knowledge of WGS speakers couldn’t have asked for a better shopping experience.Andre
I picked one of these up used. 5 stars. Really like it. It's warm, not ice picky. Handles overdrive nicely without fizzy sounds. It's not what you want if you're into crystaline highs, but it sounds good clean. I much prefer this to the G10C which is quite fizzy with distortion. Also to service – I bought direct from WGS. I got a bad G10C, but they took it back, refunded the price, and shipping both directions. Good service overall. That was my first experience with them. Based on that, I'm comfortable buying again…may pick up a 2nd G10C/s instead of running the mixed pair in a 2×10. I'm trying a couple other brands as well. An eminence legend 10516, and a Weber 10F150. We'll see what I like and what combinations I like. I like the legend by itself, haven't paired it up yet. Haven't received the Weber just yet. I play mostly blues, blues-rock, and classic rock. Hate ice pick highs, and like warmer tones and maybe a little more midrange, but not a lot of crystal highs. This speaker works well for that.Johnny Guitar
8. Celestion G10 Vintage 10" Guitar Speaker (8 Ohm)
Product Details:
This 10" 60w ceramic magnet speaker has been voiced to produce the unmistakable celestion vintage tones. pushed hard it has plenty of growl and performs with very solid bass, muscular mids, and an extremely articulate top end. in addition, the g10 vintage employs a 1.75" round copper voice coil, has a frequency range of 100-5500hz, and sensitivity of 97d b (1w @ 1m). golden sand finish. the g10 vintage is the natural evolution of the well-respected vintage 10. closer to the sound of the vintage 30 than its predecessor, the g10 vintage still maintains a distinctive tonal flavor of its own. all of these speakers use the same voice coil designs and similar ceramic magnet structures to achieve their familiar, hard-rocking celestion sound.
Specifications:
| Nominal diameter | 10 inch, 254mm |
| Power Rating | 60W |
| Nominal impedance | 8 Ohms and 16 Ohms |
| Sensitivity | 97dB |
| Chassis type | Pressed Steel |
| Voice coil diameter | 1.75 inches, 44.5mm |
| Voice coil material | Round copper |
| Magnet type | Ceramic |
| Magnet weight | 31oz, 0.88kg |
| Frequency range | 100-5500Hz |
| Resonance frequency, Fs | 115Hz |
| DC resistance, Re | 7.47 Ohms & 12.33 Ohms |
| Diameter | 10.1 inches, 256mm |
| Overall depth | 4.1 inches, 104mm |
| Magnet structure diameter | 5.3 inches, 134mm |
| Cut-out diameter | 9.0 inches, 229mm |
| Mounting slot dimensions | 0.2 x 0.3 inches, 6 x 8mm |
| Number of mounting slots | 4 |
| Mounting slot PCD | 9.6 inches, 245mm |
| Unit weight | 5.3lb, 2.4kg |
9. Eminence Legend Bp102 10" Bass Guitar Speaker, 8 Ohm
Product Details:
The eminence legend bp102 10" bass speaker delivers rich bass tone with a lot of punch. recommended for professional bass guitar applications in sealed or vented enclosures. the replacement speaker works well in single or multi-driver designs. use the eminence legend bp102 as a direct replacement speaker in the ampeg svt-810e, the kustom groove 4120, the gallien-krueger 4120 sbx, the ashdown mag 410t & mag810t, and the basson b410b speaker cabinets. eminence recommends the legend bp102 as a direct replacement in the kustom groove 310c, the ampeg ba210sp, the peavey bam 210 combo amps.
Specifications:
| Product Type | Stage speaker driver |
| Speaker Type | Passive |
| Speaker Diameter | 10" |
| Continuous Power | 200 Watt |
| Peak Power | 400 Watt |
| Frequency Response | 40 – 2000 Hz |
| Nominal Impedance | 8 Ohm |
| Sensitivity | 91.8 dB |
| Magnet Type | Ferrite |
| Speakers Included | 1 x speaker driver – 10" – 200 Watt – 40 – 2000 Hz – 8 Ohm – wired |
| Driver Details | Speaker driver: woofer driver – 10" – ferrite – paper |
| Recommended Enclosures | Ported – 0.9 – 2.19 cubic feet Sealed – 0.5 – 1 cubic feet |
| Diameter | 10.1 in |
| Width | 10.1 in |
| Depth | 4.3 in |
| Weight | 8.91 lbs |
| Diameter | 9.2 in |
| Service & Support | Limited warranty – parts and labor – 7 years |
10. Celestion Vt-Junior 10" Guitar Speaker 8 Ohm
Product Details:
Loaded into many popular, branded practice combos the vt jr, is now available to buy for replacement and upgrades. the 10-inch vt jr. has been formulated using the same recipe of old and new design techniques, delivering the same balance and musicality as its big brother the v-type. expect a juicy low mid punch together with plenty of high end sparkle, and the same thrilling responsiveness that will leave you feeling connected to your music.
Specifications:
| Frequency | 90 – 5500 Hz |
| Sensitivity | 95 dB |
| Impedance | 8 Ohms |
| Power Handling | 50 Watts |
| Coil Material | Copper |
11. Eminence Legend Ca10-8 10" Bass Guitar Speaker, 8 Ohm
Product Details:
Specifications:
| Nominal Basket Diameter | 10 inches (254 mm) |
| Nominal Impedance | 8 Ohms |
| Watts | 200 W |
| Music Program | 400 W |
| Resonance | 53 Hz |
| Usable Frequency Range | 50 Hz – 3 kHz |
| Sensitivity | 96.3 dB |
| Magnet Weight | 38 oz. |
| Gap Height | 0.312 inch (7.9 mm) |
| Voice Coil Diameter | 2 inches (51 mm) |
| Resonant Frequency (fs) | 53 Hz |
| DC Resistance (Re) | 4.83 Ohms |
| Coil Inductance (Le) | 0.51m H |
| Mechanical Q (Qms) | 6.53 |
| Electromagnetic Q (Qes) | 0.49 |
| Total Q (Qts) | 0.45 |
| Compliance Equivalent Volume (Vas) | 51.05 liters (1.8 cubic ft.) |
| Peak Diaphragm Displacement Volume (Vd) | 105.7 cc |
| Mechanical Compliance of Suspension (Cms) | 0.3 mm/N |
| BL Product (BL) | 10.07 TM |
| Diaphragm Mass Inc. Airload (MMs) | 31 grams |
| Efficiency Bandwidth Product (EBP) | 109 |
| Maximum Linear Excursion (Xmax) | 3.02 mm |
| Surface Area of Cone (Sd) | 350.1 cm2 |
| Maximum Mechanical Limit (Xlim) | 7.0 mm |
| Driver Volume Displaced | 0.043 cubic ft. (1.22 liters) |
| Overall Diameter | 10.5 inches (266.7 mm) |
| Baffle Hole Diameter | 9.01 inches (228.9 mm) |
| Front Sealing Gasket | Yes |
| Rear Sealing Gasket | Yes |
| Coil Construction | Copper voice coil |
| Coil Former | Kapton former |
| Magnet Composition | Ferrite magnet |
| Core Details | Vented and extended core |
| Basket Materials | Die-cast aluminum basket |
| Cone Composition | Paper cone |
| Cone Edge Composition | Cloth cone edge |
| Dust Cap Composition | Treated paper dust cap |
12. Eminence Legend 1058 10" Guitar Speaker, 8 Ohm
Product Details:
Dead mint condition ready to be used. from the web – the eminence legend 1058 10" guitar speaker gives you vintage american tone with a punchy low end. the 75w legend 1058 has a warm, smooth tone to it that's perfect for blues, rock, and country. you'll love how defined your sound is, with a smooth top end that has a hint of sparkle. so put one of the world's most-played speakers in your guitar amplifier, with the eminence legend 1058 10" guitar speaker!
Specifications:
| Material | Steel |
| Speaker Diameter | 10.11" |
| Impedance | 16 Ohm |
| Sensitivity | 99 dB |
| Output Power | 75 W |
13. Celestion G10 Creamback Guitar Speaker – 16 Ohm
Product Details:
Guitar players love celestion creamback speakers. the updated g10 creamback packs everything guitar players love into a 10-inch format. hand-built in the uk using the same production methods and materials developed for the 12-inch models, the g10 creamback uses a ceramic magnet and a 1.75-inch voice coil to deliver 45-watt power handling. with all the punch and dynamics typical of a 10, its overall tone is warm, expressive, detailed and well-balanced.
Specifications:
| Nominal diameter | 10", 254mm |
| Power rating | 45W |
| Sensitivity | 96dB |
| Chassis type | Pressed steel |
| Voice coil diameter | 1.75", 44.5mm |
| Voice coil material | Round copper |
| Magnet type | Ceramic |
| Magnet weight | 14oz |
| Frequency range | 95-5500Hz |
| Resonance frequency, Fs | 98Hz |
| Cut-out diameter | 9.0", 229mm |
| Diameter | 10.0", 254mm |
| Magnet structure diameter | 4.9", 124mm |
| Mounting slot dimensions | 0.25 x 0.43", 6.5 x 11mm Ø |
| Mounting slot PCD | 9.6", 245mm |
| Number of mounting slots | 8 |
| Overall depth | 4.0", 102mm |
| Unit weight | 3.5lb, 1.6kg |
14. 5core 10" Guitar Speaker For Guitar Amplifier 60w Rms Universal Replacement Sp1090gtr
Product Details:
Nobody knows more than us about designing and manufacturing guitar speakers and the 5core originals are proof of that. this range is built to exacting standards for consistently high quality and reliability, delivering 5core tone and performance in some of the world's most well know amps and cabs.
Specifications:
| Country of Origin (subject to change) | India |
15. Jensen P10q Vintage Alnico 10 Inch 40w 8 Ohm Speaker
Product Details:
The one that started it all. as the chosen speaker for the classic vox ac30 amplifier, the celestion blue has been etched in history as the unmistakable sound of the 60's british invasion – the original voice of rock n roll. it has a distinctive growl and warm body, with a laid back alnico feel of a dampened attack, and a chiming bell-like top-end. driven hard, it oozes rich definition and develops a beautiful musical compression. the celestion blue is the benchmark for guitar speaker excellence.
Specifications:
| Basket Material | Pressed Sheet Steel |
| Diameter | 10 in. |
| Diaphragm Area (S D ) | 330.10 cm |
| Linear Displacement, maximum (X MAX ) | 1.00 mm |
| Losses Electrical Resistance (R ES ) | 32.90 Ω |
| Nominal Overall Diameter | 259.00 mm |
| Reference Efficiency (n O ) | 1.01 % |
| Total Q Factor (Q TS ) | 1.44 |
| Voice Coil DC Resistance (R e ) | 5.57 Ω |
| Voice Coil Diameter | 1.25 in. |
16. Celestion Tube 10 Guitar Speaker 8 Ohm
Product Details:
As the name suggests, the tube 10 sounds great when driven by tube amplification. designed to deliver maximum response and classic tone.10 inch speaker available in 8 ohm model only. model # t5470/awd features: designed to deliver maximum response and classic tone. 10 inch speaker available in 8 ohm model only.
Reviews:
built a 2×10 for my smaller living room rig it sounds great !!Bentcloud
Sounds good for a clean channel pushed by an epiphone valve jr. 5 watt head. Beautiful overdrive tones but it can't handle heavy bass alone or heavy distortion. So plan on buying two of them. I play one with the valve jr and I can keep up with a line 6 lowdown 1×12 150 watt bass amp turned up to 1 o'clock. I plan to buy anothersunburst jackson
17. Alto Ts310 10" 2-Way Powered Loudspeaker
Product Details:
The alto professional truesonic ts310 is a 10" 2-way 2000w powered loudspeaker offering full coverage and high output for musicians, djs, and audio engineers in concert venues, clubs, and live stage applications. it features 2000 watts of class-d amplification driving the 10" woofer and 1.4" high-frequency compression driver for a frequency response of 54 hz to 20 khz and a maximum spl of 129 db. the lightweight trapezoidal injection-molded polypropylene enclosure can be placed atop a standard speaker pole, wall- or ceiling-mounted via an optional bracket, or hung from integral m10 suspension points. additionally, the cabinet angles accommodate floor positioning for wedge configurations. integrated carry handles enable easy transport and positioning. the xlr-1/4" trs combo inputs accept sources such as mixer outputs, media players, instruments, or dynamic microphones. level and tone adjustments are possible via the volume knobs and contour switch. an xlr link output allows simple daisy-chaining to additional powered loudspeakers. leds are present for power and clip indication. the ts310 is designed and tuned in the usa, and includes an iec power cable.
Specifications:
| Peak Power | 2000 W |
| Maximum SPL | 129 dB peak |
| Crossover | 2.5 kHz |
| Frequency Response | 54 – 20 kHz (+/- 3 dB) |
| Dimensions | 20.6" H x 12.6" W x 11.8" D |
Reviews:
I bought one of these speakers here at MF about 4 years ago and with this sale price, it is even less expensive now! This powered monitor is a true workhorse and it has enormous headroom. I have used this speaker in many musical applications and it has performed flawlessly. I bought a Harbinger 4112, last year and played a Yamaha P-515 directly straight into the back of each speaker, rather than into a mixing console/board. I did a mono, one speaker comparison. The Harbinger did have better frequency response, yet was much more harsh sounding. This Alto sounds smooth and warm and I have never needed to turn it past unity gain. This monitor is on sale right now and I can not recommend buying it, enough. The listed 1000 watts RMS are real, and the drivers can handle the power with ease. The only point of contention is that they do scratch very easily and so I would find a good generic extra sized tote for each monitor and wrap each one with a thin blanket before placing them inside for transporting. Highly recommend this product, especially at this very reduced sale price.NoteJunkie
Thank you Pmt for delivering my speak and the very next day during this epidemic of COVID-19. Very pleased with this ALTO Ts310 It is a great product I’ve had the 8 inch and a 10 inch and I love to know what the 15inch sounds like. Also own QSC K-series speakers two and the Bose L1S system. I know a thing or two about sound Quality. If these speakers are reliable I can see me buying many more of these for the music sessions I do. I can leave these in the boot of my car and get in from a GIG to my family and not have to unload the whole car, they are nice and compact and have plenty of power for an all nighter in a normal size pub. In fact the sound quality has made me compare this to Speakers three times the price, in my situation I don’t need to push the sound too loud so that the audience is uncomfortable for me although they have for 2000 W available I only use about 25% of that in the small venues I run. I do my big outside venues for 2000 people that’s when I need my QSC is all outfront and I use these I do my big outside venues for 2000 people that’s when I need my QSC is all outfront and I use the Altos as Foldback. An absolutely brilliant product you can’t go wrong really with the eight 1012 inch models they give you a great result ultraportable really worth every penny how they value secondhand and they really got a good name for themselves now.adam h.
I purchased the TS312 as basically a "second attempt" to find an all-around speaker for home practice using my HX Stomp (modeling pedal), as well as synths, drum machines, and some bass guitar. I first purchased the HeadRush FRFR-108, which was a new release as a smaller version of last year's FRFR-112. (The FRFR-112 and TS312 are essentially the exact same speaker – the HeadRush is just marketed towards use with guitar modelers). But the FRFR-108 was a pretty big disappointment – the low end was flabby and distorted, even within the typical frequency range of guitars. And trying to run bass guitar or deep frequencies from a synth or keyboard was essentially a non-starter. The Alto TS312 excels in all of the areas that the FRFR-108 failed me. It has massive low end when placed on the floor as a "wedge" monitor, but retains clarity and articulation even at lower practice volumes. Modelers like the Helix can cover a huge variety of tonal genres, and the TS312 accurately conveys those sounds while feeling mostly like a "real amp". The only real downside to the TS312 is that at 35 pounds and approximately 2 feet in width, it's not quite as compact as I had hoped. But it's also not significantly bulkier than a 12" guitar combo (or certainly a 2×12" like a Fender Twin or Vox AC30). With the giant handles on all sides, it's also much easier to move around. And unlike a guitar amplifier, a good FRFR/PA speaker can be used with a variety of instruments, including guitar, bass, synth, drum machines, and vocals. This Alto unit seems to be a pretty good value and I hope to get many years of good use out of it.Jeff H
18. Speaker – Jensen Jets, 10 Inch, Electric Lightning, 50 Watts
Product Details:
Looking for a guitar speaker that delivers straightforward, powerful tone with fat lows, throaty midst and crisp, bright highs, that responds to overdrive distortion with a commandingly strong and well defined crunch. then look no further. the electric lightning is that speaker. winning the hearts and souls of guitarists the world over. the electric lightning is capable of a very aggressive hard rock/metal tone with a warm and open sound overall. overall diameter 10 quot; impedance 8 ohm rated power 50 watts magnet ceramic overall weight 6.6 lbs. response 70-6k voice coil diameter 1.5 quot; magnet weight 28.5 oz.
Specifications:
Reviews:
Holy smoke! I hear 'ya loud and clear, Electric Lightning 10"s! I stuck a pair in my Fender Custom Vibrolux (basically a hot-rodded '63 Vibroverb) which I have rebuilt to 1963 Vibroverb specs. Very true-sounding speakers. Extremely efficient, hardly any cone breakup, and super-tight with a very balanced EQ spectrum. They added significant weight to my amp compared to the stock Eminence AlNiCo speakers, but I'm glad I made the switch!Michael
Just replaced a mix matched set with a quartet of 10" Electric Lightnings in a Super Reverb. While they sounded tight at first, over several days they broke in like gold, both super clean or heavily preamped. The bass response is more round than ever, and with none of the mushiness I have associated many 10" designs. I'm able to run more low than ever and the low E string just sounds fantastic. They are stong/robust sounding, akin to the tone of 12" speakers. The highs really mellowed out and sing like I had hoped Overall the sound is simply huge, clear, and articulate at any volume. I would think any player will see benefits regardless of musical style. Great improvement and speaker!Brad
19. 10 Inch Guitar Speaker; 35w; 8
Product Details:
Eminence legend alnico 10 for your consideration is this eminence 10" legend alnico speaker. speaker was used for approximately 5 hours and is in perfect condition. 35 watts-8ohms. vintage american tone with moderate, but tight, percussive lows and extended highs. hard-working under the bright lights. ideal vintage alnico jensen replacement.
Specifications:
| Nominal Basket Diameter | 10-in, 254 mm |
| Usable Frequency Range | 100 Hz – 5 kHz |
| Magnet Weight | 6 oz |
| Gap Height | 0.25-in, 6.4 mm |
| Voice Coil Diameter | 1-in, 25 mm |
| Resonant Frequency (fs) | 95 Hz |
| DC Resistance (Re) | 5.8 Ohms. |
| Total Q (Qts) | 1.47 |
| Compliance Equivalent Volume (Vas) | 31.5 liters / 1.11 cu.ft |
| Peak Diaphragm Displacement Volume (Vd) | 72.4 cc. |
| BL Product (BL) | 5.7 TM. |
| Maximum Linear Excursion (Xmax) | 2.1 mm |
| Surface Area of Cone (Sd) | 344.9 cm2 |
| Sealed | Acceptable |
| Driver Volume Displaced | 0.027 cu.ft. / 0.77 liters |
| Net Weight | 2.9 lbs, 1.32 kg. |
| Dimensions | 11.25×11.25×5.25 |
Reviews:
Installed on 5F2 cabinet. The circuit is 6V6 PP based on 6G3. This speaker does great job as expected. Sufficient power with warmth. Keeping richness of the sound, the clarity of chords is amazing. So, I ordered again for my another customer's amplifier. Excellent alnico speaker.Yasuhiro
I installed 4 of these in my Fender Hotrod Deville 410 and they really brought the amp to life The clarity and sparkle in the clean channel was like someone took a cover off the amp I know everyone has different taste in the sound but they work for me, I have always like Alnico speakers betterastroden
20. Eminence Cannabis Rex 10" Speaker
Product Details:
Specifications:
| Impedance | 8 ohms |
| Sensitivity | 99.3 dB |
| Magnet Material | Ceramic Ferrite |
| Power | 50 W |
| Resonance | 130 Hz |
Sharing is caring!
Speakers In Code Also Recommend:
- Ev Eliminator Speakers For Sale (Jan 2023 Update)
- Ev Speakers 15 Powered For Sale (Jan 2023 Update)
- Guitar Center Dj Speakers For Sale (Jan 2023 Update)
- Guitar Center Monitor Speakers For Sale (Jan 2023 Update)
- Guitar Center Rent Speakers For Sale (Jan 2023 Update)
- Guitar Center Speakers Jbl For Sale (Jan 2023 Update)
- Guitar Center Studio Speakers For Sale (Jan 2023 Update)
- Jbl Speakers For Theatre For Sale (Jan 2023 Update)
- Guest Speakers For Schools For Sale (Jan 2023 Update)
- Guitar Center Bluetooth Speakers For Sale (Jan 2023 Update)